Grading & Base Prep for Asphalt Driveways and Parking Lots

Grading & Base Preparation

Build the Right Foundation for Long-Lasting Asphalt

Proper grading and a compacted aggregate base are what keep asphalt driveways and parking lots from settling, cracking, and holding water. Nexus Asphalt Paving & Sealcoat prepares driveways, parking lots, and private roads across Auburn Hills and Oakland County for smooth paving and reliable drainage.

Excavation equipment preparing stone base and grading for asphalt paving project.
What We Do

Grading & Base Prep Services

We shape, stabilize, and compact the subgrade so your asphalt has the support it needs. Our crew focuses on drainage, load-bearing strength, and clean transitions to concrete, curbs, and existing pavement.

Site Grading & Drainage

We set elevations and slopes to move water away from structures and prevent ponding on the finished asphalt. Proper grading is critical for new asphalt driveway installations and parking lot paving projects.


Subgrade Stabilization

Soft or pumping areas are corrected with undercutting, stabilization, and proper material placement to reduce future settlement.


Aggregate Base Installation

We install MDOT-approved aggregate base stone for the application and thickness.


Compaction & Proof Rolling

Compaction is verified to help prevent ruts and cracks. Proof rolling helps identify weak spots before paving begins.

Why Base Prep Matters

Most asphalt problems start underneath the surface. A properly graded, compacted base improves performance and extends pavement life. Most asphalt driveway failures happen because of poor grading or inadequate base preparation.

Residential asphalt driveway installed after grading and 21AA stone base preparation in Oakland County Michigan

Better Drainage

Correct slopes reduce standing water and freeze-thaw damage.


Commercial parking lot grading and stone base prep in Auburn Hills Michigan.

Fewer Cracks & Settlement

A stable base helps prevent dips, alligator cracking, and edge failure.


Grading stone base for commercial parking lot asphalt paving

Smoother Finished Surface

Uniform support means cleaner grades, transitions, and curb lines.


Compacting gravel base to prepare for asphalt paving installation

Built for Traffic Loads

Base thickness and compaction are matched to cars, trucks, and commercial use.


Grading & Base Prep FAQs

Common questions from homeowners and commercial property managers planning a paving project.

Do I need grading if I’m repaving an existing driveway or lot?

Often, yes. If there are low spots, drainage issues, or edge failure, regrading and base correction helps the new asphalt perform better and last longer.

How do you prevent water from pooling on asphalt?

We set proper pitch and drainage paths during grading and base shaping. The goal is to move water off the pavement and away from buildings.

What base material do you use under asphalt?

Base materials vary by site and traffic loads, but typically include properly graded MDOT approved aggregate installed in lifts and compacted for stability.

How thick should the base be?

Thickness depends on soil conditions and use (driveways vs. commercial lots). We evaluate the site and recommend a base section designed for the expected traffic.

Can you fix soft spots before paving?

Yes. We identify weak areas and correct them through undercutting, stabilization, and recompaction so the asphalt has a solid foundation.

Do you handle grading for new construction paving?

Yes. We coordinate grades and elevations so the finished asphalt ties in cleanly to garages, sidewalks, curbs, and storm drainage features.

Ready to Prep Your Site for Paving?

Call (248) 872-9461 or request an estimate online. Serving Auburn Hills and Oakland County plus Macomb, Livingston, Lapeer, and Wayne counties.